ZG3NE,DIN-Rail Solid State Relay,Solid-State Relay,Q&W-ZG3NE- Q&W

ZG3NE
Medium power single phase AC output (rail mounted type)
ZG3NE Series Rail Mounted AC Output Solid State RelayZG3NE series integrated radiator (no need to calculate additional heatdissipation volume)The 22.5mm width conforms to the industrial installation design, reducingthe cabinet installation space for rail installation or screw lifting eyeinstallation.

DIN Rail - Single channel AC output
Load flows: 15, 20, 30 and 35 amps	Control voltage: 4-32VDC	Built-in RC snubber circuit and over-voltage protection		Zero-crossing or instantaneous conduction output
Load voltage: 24-280VC, 48-530VAC	Heavy industry SCR output	IP20 safe touch enclosure		LED input status indication
Model composition
Product range ZG3NE	Load phase 1A	Load voltage 2	Rated current 15			Control voltage D
Guide rail module	1A: Single-phase AC output	2: 24-480VAC 4: 3-32VDC 5: 48-530VAC	08:08 A 15:15 A 20:20 A		25:25 A 30:30 A 35:35 A	D: 04-32VDC B: 5-200VDC E: 70-280VAC

Assembly Instructions
	1. Position the rail to align with the top portion of the DIN rail on the back of the SSR2. Using reasonable force, push the SSR in the direction of the arrow3. To remove, place the screwdriver on the clip and swing in the direction shownWarning: Improper method of removing the product from theDIN rail may damage the locking system

Assembly Instructions
	1. When installing SSR, the center distance of the vertical holes can be adjusted /-1.5 mm2. For proper cooling, the SSR requires air convection (such as an indoor fan).Air convection can effectively reduce SSR heat energy generated during work.When installing multiple SSR, keep the longitudinal spacing at 80mm and the lateral spacing at least 8mm.3. If air convection cannot be provided, please reduce the load current.4. Forced cooling (such as installing indoor fans and air inlets and outlets) can significantly improve thermal performance.5. The radiator temperature should not exceed 80°С тах....WARNING: Any contact with the SSR heat sink is strictly prohibited while working.

Terminals
output	IN

Model: DBV5.5-14 / Material: CopperWiring range: 4-6mm²Implementation standard: GB/T14315-2008	Model: DBV1.25-10 / Material: CopperWiring range: 0.5-2mm²Implementation standard: GBT14315-2008
	Model: ZB6A GRMcomes with a blank marker

Derating curve		Wiring diagram

	Attention:A well ventilated working environment can effectively imrpove the working efficiency and product life of the relay

Attention
The installation, operation, maintenance and care of electrical switches should be completed by qualified personnel. We will not bear any consequences if an accident occurs due to operational problems.SSR load-side short-circuit protection must use fast fuses or fast circuit breakers. Product damage caused by short circuits will not be covered by the warranty.It is strictly forbidden to use electric screwdrivers when wiring, as this may damage the internal structure of the relay.Warning: If the heat sink of the product is hot, be sure to let the product cool before touching it. Please follow the installation instructions. Improper operation may cause serious personal injury or permanent damage to the switch.

Warning
Risk of electric shock, explosion or arc flash when installing the product!Please cut off the power before using the product.Non-compliance can result in death, serious personal injury or damage to equipment.Do not allow liquids or foreign objects to enter this product.

Size / Material
	The shell	DIN lifting eye
	PBT-GF20-V0 Flame retardant grade	cm: nickel

	Heat sink
	6063A-T6 Treatment: hard anodic matte black

Performance parameters
ZG3NE-1A 215D/220D/230D
output parameter
Working voltage(47-63HZ)	24-280					VAC
Transient 4overvoltage	800					Vpk
Maximum leakage current at off state	0.25					mAms
Minimum when disconnected	500					Vμ
Maximum load current	08	15	20	30	35	Arms
One cycle surge current	170	245	400	725	725	Apk
Conduct maximum pressure drop	1.3					Vp
Maximum use of fusel2t	128	340	880	2520	2520	A2s
Substrate thermal resistance	0.25	0.25	0.155	0.155	0.155	℃ W
controls parameter
Control voltage range	4-32					VDC
Minimum off voltage	1					VDC
Maximum input current	2					mA
Minimum conduction current	0.5					mA
Nominal input impedance	Current Regulated
Maximum conduction time	8.33					ms
Maximum break time	8.33					ms
fundamental characteristics
work environment	-20 to 80					℃
Storage environment	-40 to 100					℃
Input to output insulation voltage	4000					Vrms
Bottom insulation voltage	2500					Vrms
Input to output maximum capacitance	8					pF
Guide light color						green
Product weight	310					g
product packaging	L14.8W13.4T2.7					cm

Performance parameters
ZG3NE-1A 515D/520D/530D/535D
output parameter
Working voltage(47-63HZ)	48-530				VAC
Transient 4overvoltage	1600				Vpk
Maximum leakage current at off state	0.25				mAms
Minimum when disconnected	500				Vμ
Maximum load current	15	20	30	35	Arms
One cycle surge current	450	750	1050	1050	Apk
Conduct maximum pressure drop	1.3				Vp
Maximum use of fusel2t	880	2520	5500	5500	A2s
Substrate thermal resistance	0.25	0.155	0.155	0.155	℃ W
controls parameter
Control voltage range	4-32				VDC
Minimum off voltage	1				VDC
Maximum input current	2				mA
Minimum conduction current	0.8				mA
Nominal input impedance	Current Regulated
Maximum conduction time	8.33				ms
Maximum break time	8.33				ms
fundamental characteristics
work environment	-20 to 80				℃
Storage environment	-40 to 100				℃
Input to output insulation voltage	4000				Vrms
Bottom insulation voltage	2500				Vrms
Input to output maximum capacitance	8				pF
Guide light color					green
Product weight	310				g
product packaging	L14.8W13.4T2.7				cm

WARNING

1.Warning: Use the incorrect method to remove the product from the DIN guide may damage the locking system
2. The installation, commissioning, maintenance and maintenance of electrical switches shall be completed by qualified engineers. Q&W will not bear any consequences for accidents caused by operational problems
3.Warning: Do not use an electric screwdriver when connecting cables. It may permanently damage the wiring terminals and SSR internal structure
4.SSR load end short circuit protection must use fast fuse, product damage caused by short circuit is not within the warranty scope
5. Do not allow liquids or foreign objects to enter this product

Model comparison table
Q&W	Crydom	Celduc	Autonics	Carlo Gavazzi	Omron	Fotek	THE	i-Autoc
ZG3NE-1A215D	CKRD2410	-	SRH1-1210-N		G3PJ-215B	SSR-K10DA	-	KVS240D10-LM
		-	SRH1-1215-N		G3PE-215B		-
ZG3NE-1A220D	CKRD2420	SUL942440	SRH1-1220-N	RJ1A23D20E	G3PE-225B	SSR-K20DA	-	KVS240D20-LM
	DR2224D20U	SUL842070
		SAL942460
		SAM943460
ZG3NE-1A230D	CKRD2430	-	SRH1-1230-N	RJ1A23D30E	G3PJ-225B	SSR-K30DA	-	KVS240D30-LM
	DR2224D30U	-			G3PE-235B	SSR-K40DA	-
ZG3NE-1A520D	CKRD4810	SAL961360	SRH1-1410-N	RGC1A60D20KKE	G3PJ-515B	SSR-K10DA-H	GTJ480-25A	KVS480D10-LM
	CKRD4820	SAL962360	SRH1-1415-N	RJ1A60D20E	G3PE-515B	SSR-K20DA-H	GTJ600-25A	KVS480D20-LM
	CKRD6010		SRH1-1420-N	RJ1A60D20U				KVS600D10-LM
	CKRD6020							KVS600D20-LM
	DR2260D20U
ZG3NE-1A535D	CKRD4830	SAL963460	SRH1-1430-N	RJ1A60D30E	G3PJ-525B	SSR-K30DA-H	GTJ600-35A	KVS480D30-LM
	CKRD6030	SAL965460			G3PE-525B	SSR-K40DA-H	GTJ600-40A-22	KVS600D30-LM
	DR2260D30U	SUL765070			G3PE-535B
	DR2260D35U	SUL865070
		SUL867070
SSR models and parameters may change at any time. The model comparison in the above table needs to be checked against each specification parameter to ensure its accuracy.