1. Color code sensors with multiple spectra are suitable for different packaging machines
2. Complete specifications with plastic shell and aluminum die-cast shell for design selection
3. Different output modes meet working conditions

1. Various specifications and sizes
2. 0-10V output and 4-20MA output are available for selection
3. Detection distance 5mm-15mm is available for design selection

1. The installation dimensions are consistent with those of the international brand Diens and can be directly interchanged
2. The push-button operation facilitates work efficiency
3. The plug-in connection cable facilitates installation and maintenance
4. The working status is clearly visible with an indicator light

1. Multiple output modes, small size, easy installation
2. Fast response frequency, suitable for detection of fast-moving objects
3. Fully threaded housing, suitable for embedded installation

1. The installation dimensions are consistent with those of international products and can be directly interchanged
2. Complete specifications, detection distance 1MM-5MM optional
3. Multiple output modes

1. Suitable for hydraulic equipment modification
2. Stable detection distance
3. Oil pressure resistance up to 500 bar
4. Stainless steel housing, sensing surface material ZY02

1. Teflon shell is acid and alkali resistant
2. Various output forms

1. Use different colors to mark different output modes, which is convenient for users to distinguish the output logic mode
2. Yellow represents NPN output mode, working voltage: 6-36VDC
3. Green represents PNP output mode, working voltage: 6-36VDC
4. Red represents AC output, working voltage: 90-250AC

1. Different colors distinguish different output forms
2. Detection distances are available from 5MM-20MM
3. Various dimensions make design and selection easier

1. Wide operating voltage, high frequency 300KHZ
2. Long life, small size, easy installation

1. With diffuse reflection and different optical fibers
2. Complete specifications, different optical fiber lengths can be customized according to design requirements

Aiso called magnetic switch, reed sensor is applicable for postion determination of pneumatic and/or hydraulic evinder and piston pump. it also can be used as limit switch. When the magnetic object approaches, the reed closes and sends our switch signal throug magnification. Compared with inductive sensor, it has the following strongpoints can be installed in metal closely and site by side and detect through metal object. Its detection distance subjects to the intensity of magnetic field of detected object. Fleed senser is not ap. plicable in the occasion of severe vibration.

1. Corrosion-resistant capacitive proximity sensor
2. Teflon shell, acid and alkali resistant
3. With adjustable potentiometer, the detection distance can be adjusted according to different detection objects

1. Use different colors to mark different output modes, which is convenient for users to distinguish the output logic mode
2. Yellow represents NPN output mode, working voltage: 6-36VDC
3. Green represents PNP output mode, working voltage: 6-36VDC
4. Red represents AC output, working voltage: 90-250AC
5. Detection of non-metallic or metal objects at a distance of 5MM-25MM, different specifications and different sensing distances

1. There are various specifications of straight plug or bent plug for design selection
2. The bent plug connector has a status barrier to directly display the working of the sensor
3. The connector interface can be customized in different lengths according to customer requirements